Pitakonan
1 Apa aku bisa njaluk direktori lan lembar data sampeyan?
Sampeyan bisa njupuk informasi produk ing download kita utawa ing saben kaca rincian produk
2 Apa aku bisa njaluk penawaran?
mesthi! Mangga konfirmasi model (nomer Part) lan jumlahe, Yen sampeyan duwe syarat khusus, mangga tetep listing kanggo kita, lan kita bakal nyedhiyani sampeyan karo kutipan pas wektune adhedhasar kabeh syarat,
3 Apa jenis pembayaran sing sampeyan tampa? Kepiye babagan pangiriman?
Biasane sampeyan bisa mbayar liwat akun T / T, Nanging kanggo sawetara pesenan nyoba, sing duwe jumlah cilik, kita suport West Uion lan Alipay.
4 Apa aku bisa njaluk conto? Apa iku gratis?
Sampel kasedhiya, nanging biaya lan barang kudu ditanggung ing sisih sampeyan.
5 Apa jinis wujud sing kasedhiya kanggo bantalan vakum seri ZP? Uga, apa bedane aplikasi?
Vacuum Pad Bentuk & Aplikasi:
Datar: Cocog kanggo bahan kerja sing rata lan rata.
Flat karo Iga: Cocog kanggo workpieces deformable utawa sing mbutuhake release aman.
Deep: Dirancang kanggo workpieces sudhut mlengkung.
Bellows: Digunakake nalika papan diwatesi kanggo buffer utawa kanggo permukaan miring.
Oval: Paling apik kanggo benda kerja sing dawa utawa sing duwe area kontak cilik sing mbutuhake posisi sing tepat.
Ball Joint : Kanggo workpieces karo lumahing non-horisontal.
High Load: Dirancang kanggo workpieces abot.
Karet Silikon Semikonduktif : Nyedhiyakake proteksi discharge elektrostatik (resistance lumahing kurang).
Buffer : Kanggo benda kerja kanthi dhuwur sing beda-beda utawa mbutuhake panyerepan impact.
6 Apa sing kudu ditindakake nalika tekanan vakum ing generator vakum seri ZH mudhun?
Seri ZH (Tipe Porting Badan):
1. Yen sawetara unit nuduhake garis exhaust umum, tingkat vakum bisa uga ora munggah kaya samesthine amarga interference.Njamin pipa exhaust ukuran generously kanggo ngilangke backpressure.
2. Nalika nggunakake silencer, priksa materi akustik kanggo kontaminasi utawa reassess ukurane yen perlu.
Seri ZH (Tipe Kotak):
1. Verifikasi yen materi sing nyerep swara reged lan ganti yen dibutuhakeKabeh Model Seri ZH:
1. Priksa manawa ana obyek manca (contone, lebu, kelembapan) sing mlebu saka sisih pad vakum, amarga iki bisa ngalangi diffuser internal lan ngrusak kinerja. Tansah masang filter vakum ing sisih intake.
2. Konfirmasi yen tekanan pasokan menyang unit tetep stabil lan ora mudhun.
7 Kepiye carane nemokake gaya angkat cangkir nyedhot vakum seri ZP?
Daya angkat cangkir nyedhot vakum bisa dipikolehi saka rumus pitungan uga saka tabel gaya angkat teoretis.
Formula kalkulasi:
W = P x S x 0,1 x 1/t
(W: Daya angkat (N), P: Tekanan vakum (Kpa), S: Area bantalan (cm²), lan t: Faktor keamanan 4 utawa luwih kanggo ngangkat horisontal lan 8 utawa luwih kanggo ngangkat vertikal)
Tabel gaya angkat teoritis:
Gaya angkat teoretis bisa ditemokake kanthi nggunakake diameter pad lan tekanan vakum.
Ora kalebu faktor safety, supaya dibagi gaya angkat teoretis kanthi faktor safety "t" kanggo entuk gaya angkat.
Gaya angkat = gaya angkat teoretis ÷ t
Tabel gaya angkat teoretis (gaya angkat teoretis = P x S x 0.1) kapacak ing ngisor iki.
| Gaya Angkat Teoritis (Gaya Angkat Teoritis=P×S×0,1) | |||||||||||||||
| Diameter Pad/Suction Cup (ø1.5 nganti ø50) (N) | |||||||||||||||
| Diameter Pad/Suction Cup (mm) | ø1.5 | ø2 | 03.5 | ø4 | ø6 | ø8 | ø10 | ø13 | ø16 | ø20 | ø25 | ø32 | ø40 | ø50 | |
| Area Pad/Suction Cup S(cm2) | 0.02 | 0.03 | 0.10 | 0.13 | 0.28 | 0.50 | 0.79 | 1.33 | 2.01 | 3.14 | 4.91 | 8.04 | 12.6 | 19.6 | |
| Tekanan vakum (kPa) | -85 | 0.15 | 0.27 | 0.82 | 1.07 | 2.40 | 4.2 | 6.6 | 11 | 17 | 26 | 41 | 68 | 106 | 166 |
| -80 | 0.14 | 0.25 | 0.77 | 1.00 | 2.26 | 4.0 | 6.2 | 10 | 16 | 25 | 39 | 64 | 100 | 157 | |
| -75 | 0.13 | 0.24 | 0.72 | 0.94 | 2.12 | 3.7 | 5.8 | 10 | 15 | 23 | 36 | 60 | 94 | 147 | |
| -70 | 0.12 | 0.22 | 0.67 | 0.88 | 1.98 | 3.5 | 5.5 | 9.3 | 14 | 22 | 34 | 56 | 87 | 137 | |
| -65 | 0.11 | 0.20 | 0.63 | 0.82 | 1.84 | 3.2 | 5.1 | 8.6 | 13 | 20 | 31 | 52 | 81 | 127 | |
| -60 | 0.11 | 0.19 | 0.58 | 0.75 | 1.70 | 3.0 | 4.7 | 8.0 | 12 | 18 | 29 | 48 | 75 | 117 | |
| -55 | 0.10 | 0.17 | 0.53 | 0.69 | 1.55 | 2.7 | 4.3 | 7.3 | 11 | 17 | 27 | 44 | 69 | 107 | |
| -50 | 0.09 | 0.16 | 0.48 | 0.63 | 1.41 | 2.5 | 3.9 | 6.7 | 10 | 15 | 24 | 40 | 62 | 98 | |
| -45 | 0.08 | 0.14 | 0.43 | 0.57 | 1.27 | 2.2 | 3.5 | 6.0 | 9 | 14 | 22 | 36 | 56 | 88 | |
| -40 | 0.07 | 0.13 | 0.38 | 0.50 | 1.13 | 2.0 | 3.1 | 5.3 | 8 | 12 | 19 | 32 | 50 | 78 | |
| Diameter Pad/Suction Cup (ø63 nganti ø340) (N) | |||||||||||||||
| Diameter Pad/Suction Cup (mm) | ø63 | ø80 | ø100 | ø125 | ø150 | ø200 | ø250 | ø300 | ø340 |
|
|||||
| Area Pad/Suction Cup S(cm2) | 31.2 | 50.2 | 78.5 | 122.7 | 176.6 | 314.0 | 490.6 | 706.5 | 907.5 | ||||||
| Tekanan vakum (kPa) | -85 | 265 | 427 | 667 | 1043 | 1501 | 2669 | 4170 | 6005 | 7714 | |||||
| -80 | 250 | 402 | 628 | 982 | 1413 | 2512 | 3925 | 5652 | 7260 | ||||||
| -75 | 234 | 377 | 589 | 920 | 1325 | 2355 | 3680 | 5299 | 6806 | ||||||
| -70 | 218 | 351 | 550 | 859 | 1236 | 2198 | 3434 | 4946 | 6353 | ||||||
| -65 | 203 | 326 | 510 | 798 | 1148 | 2041 | 3189 | 4592 | 5899 | ||||||
| -60 | 187 | 301 | 471 | 736 | 1060 | 1884 | 2944 | 4239 | 5445 | ||||||
| -55 | 172 | 276 | 432 | 675 | 971 | 1727 | 2698 | 3886 | 4991 | ||||||
| -50 | 156 | 251 | 393 | 614 | 883 | 1570 | 2453 | 3533 | 4538 | ||||||
| -45 | 140 | 226 | 353 | 552 | 795 | 1413 | 2208 | 3179 | 4084 | ||||||
| -40 | 125 | 201 | 314 | 491 | 706 | 1256 | 1962 | 2826 | 3630 | ||||||
| Pad Oval / Cangkir Nyedhot (2×4 nganti 8x30,30x50) (N) | |||||||||||||||
| Diameter Pad/Suction Cup (mm) | 2×4 | 3,5×7 | 4x10 | 5×10 | 6x10 | 4x20 | 5×20 | 6×20 | 8x20 | 4x30 | 5×30 | 6×30 | 8×30 | 30×50 | |
| Area Pad/Suction Cup S(cm2) | 0.07 | 0.21 | 0.36 | 0.44 | 0.52 | 0.76 | 0.94 | 1.12 | 1.46 | 1.16 | 1.44 | 1.72 | 2.26 | 13.07 | |
| Tekanan vakum (kPa) | -85 | 0.60 | 1.79 | 3.0 | 3.7 | 4.4 | 6.4 | 7.9 | 9.5 | 12.4 | 9.8 | 12.2 | 14.6 | 19.2 | 112 |
| -80 | 0.56 | 1.68 | 2.8 | 3.5 | 4.1 | 6.0 | 7.5 | 8.9 | 11.6 | 9.2 | 11.5 | 13.7 | 18.0 | 105 | |
| -75 | 0.53 | 1.58 | 2.7 | 3.3 | 3.9 | 5.7 | 7.0 | 8.4 | 10.9 | 8.7 | 10.8 | 12.9 | 16.9 | 98 | |
| -70 | 0.49 | 1.47 | 2.5 | 3.0 | 3.6 | 5.3 | 6.5 | 7.8 | 10.2 | 8.1 | 10.0 | 12.0 | 15.8 | 92 | |
| -65 | 0.46 | 1.37 | 2.3 | 2.8 | 3.3 | 4.9 | 6.1 | 7.2 | 9.4 | 7.5 | 9.3 | 11.1 | 14.6 | 85 | |
| -60 | 0.42 | 1.26 | 2.1 | 2.6 | 3.1 | 4.5 | 5.6 | 6.7 | 8.7 | 6.9 | 8.6 | 10.3 | 13.5 | 79 | |
| -55 | 0.39 | 1.16 | 1.9 | 2.4 | 2.8 | 4.1 | 5.1 | 6.1 | 8.0 | 6.3 | 7.9 | 9.4 | 12.4 | 72 | |
| -50 | 0.35 | 1.05 | 1.8 | 2.2 | 2.6 | 3.8 | 4.7 | 5.6 | 7.3 | 5.8 | 7.2 | 8.6 | 11.3 | 66 | |
| -45 | 0.32 | 0.95 | 1.6 | 1.9 | 2.3 | 3.4 | 4.2 | 5.0 | 6.5 | 5.2 | 6.4 | 7.7 | 10.1 | 59 | |
| -40 | 0.28 | 0.84 | 1.4 | 1.7 | 2.0 | 3.0 | 3.7 | 4.4 | 5.8 | 4.6 | 5.7 | 6.8 | 9.0 | 53 | |
